How to enable Network Bridge

 

To enable Bridging in Euphony OS you need to have two Ethernet cards installed on your computer.  Both shall be correctly recognized by OS (ie.Euphony OS needs to support this specific hardware!). .

Bridge is activated in Settings->System settings-Network Interfaces. 

"Network Interfaces" - dialog appears only if you have two network cards in system. Notice: Dialog will not be appear if system does not recognize two Network cards present.

 

 

 

Attachments:
bridge.png bridge.png

 
Was this article helpful? yes / no
 

 
Powered by Help Desk Software HESK, in partnership with SysAid Technologies